Thursday, July 10, 2014

Dovetail Hinge with Peter Ross

Recently I purchased a DVD from Popular Woodworking featuring Peter Ross forging a dovetail hinge. As with other Peter Ross DVD’s, it was well done and very informative. Someday I would love to take a class with him, but as North Carolina is a long way from Nebraska, I will have to settle for watching videos. I do hope there will be more in the future.

I got into blacksmithing so I could fabricate my own hardware for the furniture and tools I make. This video was informative enough so someone with a beginner skill level like myself could actually turn out a working period correct hinge. Besides a basic blacksmithing setup, all I needed to make the hinge was a jig to bend the sheet metal around. This was difficult because I don’t have a modern welder, but I was able to cobble together something out of angle iron and bolts. It did work just not that great so I will have to find someone to weld me a jig like Ross’s.


The hinge itself is formed by forge welding 16 gauge sheet metal to itself. The blanks are shown on the top of the door panel. From there it’s all about filling and fitting. My hinge is not as nice as Ross’s, but I’m pleased with it.

If you want to make a working period hinge, but don’t have a blacksmith shop try making a snipe/gimmal hinge like the set below the dovetail hinge. I made these by taking the thickest clothes hanger I could find, heating it with a torch, and bending the loop around a 16 penny nail. Hammer or file flat and you have a very durable hinge.


See Peter Follansbee webpage for more information on gimmals and how to install them. I have used them on a tool chest I made and they have worked great. Keep in mind modern mild steel is more durable than the old wrought iron used in antique gimmal hinges.

3 comments:

Unknown said...

Nice hinge, I hope mine turn out as nice as yours. Ill have to forge some large ones for the door, and some a bit smaller for the window shutters. Im not sure my little riveters forge will get up to a welding heat, may have to leave them folded tight. How was the forge welding for you? Use lots of borax? Or sand perhaps?

Unknown said...

Nice hinges, did you have much trouble with the weld? Use much borax, or sand maybe?

Frontier Carpenter said...

Thanks! I used a lot of borax on the hinges. The metal is so thin your rivet forge shouldn't have any problem getting them to a welding heat. Because the metal is folded over it doesn't have to be that great of a weld. When the fastens are driven through it can't really open up. I would think the barn hinges would be fine just rolled.